RAM: 8GB RAM MAX (DDR3 DIMM 1333(OC)/1066/800 non-ECC, un-buffered memory) - MAX RAM SETUP on both boards Processor: Socket 775 - 3.2 GHz, 12 MB L2 Cache, 1333 MHz FSB (MAX on both boards)īEST CPU vs Availability: Intel Xeon X3370 3.00GHz / Intel Core2 Quad Q9650 3.00GHz Motherboard: Asrock G41M-S3 or Asrock G41C-GS Here is a list of compatible parts in order to obtain the BEST upgrade when building an MK9v2 main board. NVIDIA GeForce 210 1GB (PCIe 2.0 x16 | 1GB | DDR3) RAM: 8GB RAM MAX (DDR3 DIMM 1333(OC)/1066/800 non-ECC, un-buffered memory) Motherboard: Asrock G41C-GS (Should also work) - Ĭhipset: Northbridge: Intel® G41 | Southbridge: Intel® ICH7 Security: A USB security dongle (except for the Pro series). IO: Official USB PIUIO and JAMMA Interface 3145728K shows as usable even on 4GB RAM) RAM: 4GB RAM MAX (DDR2 DIMM 667/533/400 MHz) - NOTE: The mobo reserves RAM for PCI devices etc regardless of bitwise OS (I.e. Sound Chip: 5.1 CH HD Audio (Realtek ALC662)Ĭhipset: North Bridge: Intel® 945GC Express Chipset | Southbridge: Intel® ICH7 Motherboard: MK9 GA-945GCM-S2C (Should also work, but not official). RAM: (The mobo reserves RAM for PCI devices etc regardless of bitwise OS - 3145728K shows as usable even on 4GB RAM) - 4GB RAM MAX (DDR2 667/533/400 MHz) Sound Chip: 5.1 CH HD Audio (Realtek ALC888)Ĭhipset: North Bridge: Intel® 945GZ Express Chipset | Southbridge: Intel® ICH7 There isn't much sense in building an MK9v1 (It doesn't have any advantages over the Mk9v2 board.). At the time, NX2/Pro machines had either: MK6 or MK9 hardware. The MK9v1 was first shipped DURING the release of Pro1/NX2 (Late 2007-2008). HDMI, DVI, VGA), but monitor MUST support 720p or higher and GPU must pump out a HD signal. Any input physical connector type is ok (I.e. SD mode is now unsupported as of XX's release. Pump It Up Pro 2 (Using an MK9 will render the 3D arrow graphics on Pro 2! An MK6 cannot do this.) Pump It Up NX Absolute (Support for NXA can also vary.) Pump It Up NX2 (NX2 v1.54 for example throws a kernel panic on some MK9s, however, it works for others. This blog post provides technical information on how to put together a Pump It Up MK9 v1 or v2 arcade main logic board.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |